P0761: Shift Solenoid C Performance or Stuck Off
Can you still drive? You can drive cautiously. The top gear or overdrive may not engage reliably. Keep speeds moderate and avoid extended highway trips until repaired.
What Does P0761 Mean?
Code P0761 means shift solenoid C is electrically operational but mechanically stuck or not producing the expected hydraulic result. The TCM is commanding the solenoid on but the gear change controlled by solenoid C is not occurring correctly. This performance issue commonly stems from fluid contamination, wear, or valve body problems rather than an electrical fault.
Need to read your codes?
An OBD-II scanner lets you read and clear diagnostic trouble codes from your vehicle's computer. Most scanners work with any car made after 1996.
Browse OBD-II Scanners on AmazonCommon Causes
- Mechanically stuck solenoid C
- Contaminated transmission fluid
- Blocked valve body passage for solenoid C circuit
- Worn solenoid bore
- Weak solenoid spring
Symptoms
- Check engine light on
- Failure to upshift to highest gear
- Slipping when entering higher gears
- Higher RPM at steady highway speed
- Transmission may intermittently find correct gear
Diagnostic Steps
- 1Verify solenoid C electrical values are within specification
- 2Check transmission fluid condition and level
- 3Command solenoid C with scan tool and verify mechanical operation
- 4Remove and physically inspect solenoid C plunger movement
- 5Inspect valve body passages for blockages or wear
- 6Try a fluid and filter change as initial remedy and retest
Recommended Parts & Tools
shift solenoid pack
transmission fluid
transmission filter kit
valve body gasket
Estimated Repair Cost
| Type | Estimated Cost |
|---|---|
| Total Repair Cost Range | $150 - $1000 |
Get a Personalized AI Diagnostic Report
Get a detailed AI diagnosis for code P0761 specific to your vehicle. Includes step-by-step repair instructions, exact parts needed, and a cost breakdown tailored to your make and model.
Chat with AI About P0761Commonly Affected Vehicles
Related Recalls
Frequently Asked Questions
Will a transmission fluid change help P0761?
It may. If contaminated fluid is causing the solenoid to stick, fresh fluid can restore proper operation. This is worth trying before committing to solenoid or valve body replacement.
Is P0761 an electrical or mechanical problem?
P0761 is a mechanical performance issue. The electrical circuit is working, but the solenoid itself is not moving properly or the hydraulic passage it controls is restricted.
Community Fix Reports
Community reports are user-submitted and not verified by Auto AI Buddy. Results may vary.
Related Codes
Affiliate Disclosure: This page contains affiliate links. If you purchase products through these links, we may earn a small commission at no additional cost to you. This helps us maintain this free resource. We only recommend products we believe will help you diagnose and repair your vehicle. Prices shown are estimates and may vary.